15 Gifts For The Repairs To Upvc Windows Lover In Your Life

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance, you will need to locate some plastic spacers that will help the new pane to fit correctly into the window frame.

If you're planning to try to remove the glass panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not onto the floor and could be trampled.

It's a great idea to tape the gap once the glass is removed. This will stop drafts and water from entering your property until a professional is able to fix the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, with time, they can suffer from a variety of issues like sagging. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from getting worse.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, uPVC repair you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. It is important to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. Often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to shut the window and do a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. Most often, upvc window repairs window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking may need to be removed. When it is time to uPVC repair, you should be careful not to over-caulk. This will make your window more difficult to clean and lower its energy efficiency.

Check that any drainage holes are free of debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc window repairs windows are stiff to open, or slack and open with ease, it may be hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It is essentially a very simple process, but it's easier if you have someone to help hold the frame in place.

Check that the uPVC hinges open and close in the right direction. You can do this by checking for the arrows on each hinge. This shows which way the window should open.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a photo on our website. We will be pleased to offer you advice.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also due to wear and tear can become misaligned, this can cause an opening to appear between the sash and the frame. If they are damaged beyond repair, it could be necessary to have them realigned. The interlock, which is on the hinge side of the window and can also be misaligned, and again it's possible to give them a clean but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts are the window seals. These can become worn down or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen draughts.

One of the most effective ways to reduce drafts is to use a draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be put on the windowsill on top. They will help block out cold air and keep your home warm and cozy!

With a little maintenance and repair, your upvc windows will continue to provide a great level of insulation and security for your home. It is crucial to recognize that all windows have a life span and they may reach a point where it is more efficient to replace them than repair them. If you have any problems with your window made of upvc, it's best to consult an expert as soon as you can.