10 Things We We Hate About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They do not get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and will usually fit into the old frames very easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the old panes. In this case you'll need locate some plastic spacers that assist the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass to ensure that any shards will fall onto the cloth instead of landing on the floor where they could be trampled upon and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and fix the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they may be afflicted by a variety of issues, including sliding. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action as soon as you discover that your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows so you can get at the frame. Then, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and check for fitting. If you're satisfied with the fit, tighten the screws to ensure they stay in position.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

upvc window repairs near me handles can also loosen up. Most often this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to fix the loose upvc door repairs Near me window handle yourself. First, you'll need close your window and do a test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the problem is, the old caulking may need to be removed. When it comes to upvc door repairs near me repair, you should avoid over-caulking. This can make your window harder to clean and decrease its energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and upvc door repairs near me that the sill pan is angled properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens with an ease. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It is essentially a very simple process but it can be easier if you have someone to help hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrows on each hinge, this shows which way the window should open.

The problem can be caused by opening the window incorrectly or a faulty installation at the factory. This can often be resolved by sending us a photograph via our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also reduce the possibility of a window getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges, also due to wear and tear can become misaligned, this will cause an opening to appear between the sash and the frame. These can be easily repaired by giving them a good cleaning, but when they're beyond repair, it might be necessary to have them realigned or replaced. In addition, the interlock could be unbalanced. This happens on the hinge's side, and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the risk of draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking cold air.

With a little maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. However, it is important to recognise that all windows have a lifespan and eventually, they will reach an point at which it is more economical to replace them than repair them. If you are experiencing issues with your window made of upvc, it's best to consult an expert immediately.