11 Ways To Completely Sabotage Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and window repairs are durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating upvc window repairs near me windows and doors is essential. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good repair.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor, where they could be trampled.

It's a great idea tape the gap once the glass has been removed. This will keep drafts and water from entering your property until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the gap between the door and the window is significant, you may prefer a security screen that also has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues like sagging. A window that is sagging can cause problems with light, draughts and even security. It's important to take action when you notice your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could also be due to the mechanism of the handle wearing out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need close the window and perform an initial test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a fairly simple fix that can be done by any competent DIYer. Depending on how serious the issue is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce the efficiency of your energy.

Check that any drainage holes do not have debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leak originates from the glass of your double glazing near me-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. It is also possible to be repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with ease, it may be hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple procedure, but it is easier if you have someone to help hold the frame in place.

Verify that the uPVC hinges open and close in the proper direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain manner or because of improper installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are always happy to give suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges, also due to wear and tear could become misaligned. This can cause a gap to form between the sash and the frame. They can be repaired by giving them a good cleaning, but when they're beyond repair, it may be necessary to get them aligned or replaced. Second, the interlock can be disaligned. This is located on the hinge's side and may need to be cleaned. In certain instances it might be necessary to replace them.

These seals can wear down or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that all windows have a life span and they may reach an point at which it is more economical to replace them than repair them. So, if you're having issues with your upvc windows, it is always recommended to seek help from a professional as soon as possible.