10 Things We We Hate About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum or timber.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you're planning to try to remove the window panes by yourself, it is essential to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled under.

It's a good idea to seal the gap after the glass is removed. This will keep drafts and water from entering your property until a professional arrives to fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the distance between the door and the window is significant, you may prefer a security screen that also includes a window. This will provide the best of both.

2. Sagging

Upvc window repair is durable and energy efficient alternative to timber sash window. However, over time they are susceptible to a range of issues, including sliding. A sagging window can cause problems with light, draughts or even security. It's important to take action as soon as you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window so that you can get to the frame. After that, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and safe from drafts.

UPVC handles can also loosen. Often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to close your window and do an experiment fit. The corner joints of the sash need to align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

It is important to take action if awake each day to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Based on the severity of the issue the caulking used previously might need to be removed before a new layer of caulk can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and can reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. Again this can easily be repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your upvc window repairs near me window is difficult to open or it opens with an ease. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's easy to change the hinges on a window however it is easier if someone helps you hold the frame.

Check that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrows on each hinge. This shows which way the window should be opened.

The problem can be caused either by opening the window incorrectly or a faulty installation at the factory. Sending us photos through our website can often solve the issue. We are more than happy to offer assistance.

It is also crucial to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. It is recommended to do this once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. First, the hinges because of wear and tear, may become displaced, which causes gaps to develop between the sash and the frame. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it could be necessary to get them re-aligned or UPVC window repair replaced. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it is feasible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen the risk of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be placed on the windowsill on top. They can help block out cold air and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it could be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your window made of upvc, it's best to consult an expert immediately.