17 Signs You Are Working With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and generally fit into old frames very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your home until a professional comes out to repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap between the door and the window doctor is significant, you may need to consider security screens that has a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they can suffer from a variety of issues, including sliding. A sagging window can cause problems with light, draughts or even security. It's important to take action when you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you are happy with the size of the window, you can tighten screws to keep them in place.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles could also become loose. This is often caused by screws that have loosened over time, but it can also be caused by the handle mechanism wearing out. It's relatively easy to fix a loose uPVC hand. The first step is to close the window and then perform an initial test fit. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer is applied. When it is time to uPVC repair, you must be careful not to over-caulk. This will only make your window more difficult to clean and reduce its energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens with the breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It is an easy process, but it's easier when you have a person to assist in holding the frame in place.

Verify that the uPVC hinges are open and closed in the proper direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should open.

The issue could be caused by opening the window improperly or a faulty installation in the factory. This can often be resolved by sending us a picture via our website and we will be pleased to offer you suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. Firstly the hinges, again due to wear and tear may become displaced, which causes gaps to develop where the sash joins the frame. If they're beyond repair, it could be required to realign them. The interlock may be unbalanced. It is located on the hinge's side, and may need to be cleaned. In some instances it is possible to replace the hinges.

The second most frequent reason for draughts is window seals, these are prone to wear or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They can help keep cold air out and keep your home warm and cosy!

With a little maintenance and repairs windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to recognize that all windows have a lifespan and there may come a point where it is more efficient to replace them than repair them. If you have any problems with your Upvc window you should consult a professional as soon as you can.